Specifications:Span: 29.5"
Root Chord: 6"
Tip Chord: 4"
Wing Area: 145 sq. in.
Dihedral: 1/2" each tip
Airfoil: Original
Wing construction: GF over Blue foam Composite skin
Wing Covering: .75 oz glass cloth with carbon fiber reinforcement. TW=1.6oz
Tail Area: Stab/Rudder: GF over balsa
Fuselage Length:
Fuselage Type: GF/Epoxy Custom Fuselage
Additional Photos
Fuselage weight (empty): .7 ozs
Distance, LE wing to LE stab:
Weight Empty: 2 oz's without radio
Weight with CS21 or HS50's, Rx, Battery:
Radio:
Recommended Battery Size(weight):100 mah
Recommended Rx Size(type): smallest avaiable
Number of servos(type): 2
Contact: Chris Adams
chris@scrollsander.com
Back

These are some additional photos of the Fiberglass fuselage with slip-on nosecone.
Back to the MHLG photos
This shows a CS-21 next to two fuselages. You can see how far back the slip on nosecone goes. The nosecone is made of two layers of cloth. When an access hatch is cut in the main nose the fuse becomes flexible, however when the nosecone is on the fuselage nose becomes quite rigid.
This shows three fuselages with the nosecone in different positions. There is one layer of CF tow on each side to the fuselage. The fuselage is quite flexible when squeezed but very rigid in the tailboom, as seen in the main Itch photos.
Back to the MHLG photos